Eligible orders may receive up to 3% sourcing support.
Eligibility applies to qualified business buyers and is confirmed after we review your product, quantity, destination, and sourcing requirements.
These rows are labels for an ix industrial ethernet connector conversation. They are not stocked SKUs and they do not display a factory price.
No inquiry option matches that filter. Send the requirement with your own model text.
An ix industrial ethernet connector uses a 10-contact arrangement described in IEC 61076-3-124. That standard identifies the interface family. It does not prove that a particular offer mates with the jack already on a machine. Ask for the footprint drawing, latch direction, and whether the shield fingers match the panel cutout. Maker notes often describe a face smaller than an 8P8C jack. Keep that size statement attached to the maker document, then measure the quoted drawing yourself.
Power over Ethernet still needs a contact current from the datasheet. IEEE 802.3at-2009 discussions near 30 W at the PSE are not a substitute for the temperature-rise note on the 10 contacts. Impedance near 100 ohm, plus the frequency range of insertion loss and return loss, should be on the same sheet as the latch. A connector mating cycle figure without an IEC 60512 sequence is incomplete. Ingress protection belongs to the sealed version on the drawing, not to every compact plug that shares the family name.
A buyer who already knows the panel cutout can add that millimeter figure in the inquiry text. A 19 mm clearance and a 14 mm clearance are different jacks even when both labels say industrial. Gold thickness, shield can, and gland stay on separate lines so a 10-piece sample price is not mistaken for a 2,000-piece release. Open the ethernet connector price fields before a headline number is treated as landed cost. The RFQ form is where quantity, destination, and timing go. This page does not certify category performance, does not hold inventory, and does not convert a photo of a latch into a current rating.