Eligible orders may receive up to 3% sourcing support.
Eligibility applies to qualified business buyers and is confirmed after we review your product, quantity, destination, and sourcing requirements.
Quote path
An ethernet connector price is a piece figure until currency, quantity, Incoterms, plating, and freight sit beside it. LinkScope Sourcing 36 asks plants to answer that path. The desk does not publish a market discount and does not hold plugs.
A sample of 10 pieces, a pilot of 500, and a release of 5,000 can carry different gold lots. Ask whether 0.76 μm (30 μin) gold over nickel is the production callout or whether the sample used flash gold. Tooling for a changed latch is a one-time line. It should not be buried inside the piece price and then compared with a quote that excluded tooling. State the year of the drawing revision you hold, for example a 2024 panel revision, so a 2019 footprint is not treated as current.
Power over Ethernet changes the commercial sheet when the contact must carry the current behind IEEE 802.3af-2003 at 15.4 W and 350 mA, IEEE 802.3at-2009 near 30 W, or IEEE 802.3bt-2018 Type 4 near 90 W at the PSE. Those are standard discussion points. The price line should say whether the datasheet temperature rise covers the class you named. Impedance at 100 ohm and insertion loss or return loss through 500 MHz, the Category 6A upper frequency in TIA-568.2-D (2018), are evidence lines. They are not free add-ons implied by the word shielded.
Spares and a later buy can diverge if the plant sunsets a plating bath. Ask for the connector mating cycle count and the IEC 60512 sequence while the price is still open. Ingress protection, if claimed, needs the mated-pair drawing. Three limits: this page does not set a price floor, does not certify a category, and does not treat a sample lot as the production lot.
Ex-works in 2026 is not the same total as a US door delivery in the same calendar quarter. Name the Incoterm the buyer can actually accept, then ask each plant to use it. Duties, brokerage, and a wooden reel versus a carton change the landed figure. Partial shipments should say which plating lot arrives first.
A compatible jack may show a lower piece price than an OEM-coded jack. The industry split is support policy versus a wider plant list. Compare footprint, shield fingers, and LED positions before you call the lower number cheaper in any percentage. This desk will not print a saving rate. Refurbished contacts may fill a legacy panel if wear and documents are shown. New contacts may carry a clearer lot code. Keep both options as separate rows.
The copper connector price stays on plating, shield, and whether the quote is the plug or the jack. The public TIA-568 page is a question list, not a 2026 measurement by LinkScope Sourcing 36.
Put model, 8 or 10 contacts, pitch, plating thickness, shield, currency, per-piece or whole-order basis, freight, and exclusions in adjacent columns. Background: a panel shop in Georgia received two figures for a shielded plug. Process: one column showed 0.76 μm gold and included the can; the other showed flash gold and listed the can as optional. Result: the buyer kept both totals on the sheet instead of collapsing them into one slogan. That is a desk method, not a client testimonial and not a measured reduction.
Then return to the inquiry rows or submit the sheet. Describe drawings in the form. There is no upload control.